от СР Логикс ЕООД https://www.cw.srlogics.com/wiki/ 2026-04-17T11:43:42+00:00 https://www.cw.srlogics.com/wiki/ https://www.cw.srlogics.com/wiki/lib/exe/fetch.php?media=wiki:logo.png text/html 2023-09-22T09:56:31+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.cw.srlogics.com/wiki/doku.php?id=en:buttons_relays_and_programs&rev=1695376591&do=diff Buttons, outputs and programs The controller work could be divided into two groups: controlling - where is set at which button which relays should be triggered and visualizing - where are set the names of the programs and their duration. Setting the buttons text/html 2023-09-22T09:45:57+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.cw.srlogics.com/wiki/doku.php?id=en:coin_acceptor&rev=1695375957&do=diff Coin mechanism The communication with the coin mechanism is done via a standard parallel interface. There are used 6 signal lines and by transmitted pulses, the passed coins are registered on them. There are 4 types of signalization that allow different numbers of recognizable coins. text/html 2023-05-08T11:34:33+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.cw.srlogics.com/wiki/doku.php?id=en:electrical_connections&rev=1683545673&do=diff Electrical connection The controller CW01R66 consists of two circuit boards connected by a ribbon cable. The control board with a display, which is an inseparable part of the board, is intended to be placed on the front panel. The coin mechanism and all buttons are connected to it. The relay board could be placed at the base of the case as it is connected to the power supply and the control signals. text/html 2023-09-22T10:03:49+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.cw.srlogics.com/wiki/doku.php?id=en:individual_program_times&rev=1695377029&do=diff Individual program times CW01R66 can work with one time for all programs or there can be set individual time for each program. Setting the time is for 1 token or 1 euro, depending on the type of the machine. When working with coins other than 1 euro, it is calculated in proportion to the inserted amount. text/html 2023-09-22T10:19:28+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.cw.srlogics.com/wiki/doku.php?id=en:list_of_all_parameters&rev=1695377968&do=diff List of all parameters This is a list of all the groups and parameters of the controller CW01R66. Coin mechanism Coins - filtering noises After noticing a change in the signal lines of the coin mechanism we wait the given time so that all lines can establish a stable state. text/html 2023-05-08T11:17:15+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.cw.srlogics.com/wiki/doku.php?id=en:mechanical_assembly&rev=1683544635&do=diff Mechanical assembly The controller CW01R66 consists of two circuit boards - a control board with a display located on the face panel and the for connecting the control signals. To secure the controller to the face panel, there must be cut a rectangular opening for the screen and four mounting holes for the bolts and the studs. We recommend the installation of a plexiglass cap that protects the controller from mechanical stress and moisture. text/html 2023-08-13T20:12:05+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.cw.srlogics.com/wiki/doku.php?id=en:outputs_controlled_by_time&rev=1691957525&do=diff Outputs controlled by time To each one of the 16 programs could be added up to 2 times and upon their expiry specific outputs can change their state. This function is useful if for instance is needed initially for the detergent to be pumped under high pressure. text/html 2023-09-22T10:07:16+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.cw.srlogics.com/wiki/doku.php?id=en:pauses_types&rev=1695377236&do=diff Pauses types The controller CW01R66 could operate with different modes for pause depending on the client's preference. The determination, when the system is paused, is done by the settings of the parameter „Relays - reporting time“ in the group text/html 2023-05-15T20:01:51+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.cw.srlogics.com/wiki/doku.php?id=en:settings_configuration&rev=1684180911&do=diff Connecting for setting Changing all available parameters happens via a USB cable which could be connected to a computer (PC and Mac) or an Android phone or tablet(with USB OTG transition). Connecting to a Windows computer Download the application and install it. Connect to the controller using a micro USB cable. During the initial connection and the startup of the application will be detected the lack of some drivers and it will begin their installation which has to be confirmed. Upon success… text/html 2023-05-05T17:19:09+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.cw.srlogics.com/wiki/doku.php?id=en:start&rev=1683307149&do=diff Controller CW01R66 Instructions for connection and setup. Official website Mechanical assembly Electrical connections Settings configuration Main parameters Coin acceptor Buttons, relays and programs Texts and colors Advanced parameters Individual program times Pauses types Outputs controlled by time List of all parameters text/html 2023-09-22T09:59:29+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.cw.srlogics.com/wiki/doku.php?id=en:texts_and_colors&rev=1695376769&do=diff Texts and colors The availability of a color display allows each view to be customized by color and text. For each group that is associated with presenting information on the screen, there is a setting for the choice of the background. It could be solid color or with waves and you chose the color and the background and the waves. In the outlook work, there is also a chronometer that shows the remaining time like a clock for which there are colors for the passed and remaining time.